Custom built, complete and fully loaded
Seymour Duncan SSL-3 pickup set Strat® pickguard
assembly. Includes everything ready to
drop in to your favorite Strat® by simply
hooking up the hot wire (audio) and ground
wires. The pickguard assembly is built with genuine
Fender® pickguard, knobs, switch tip along with
top quality CTS potentiometers, Orange
Drop polyester film tone
capacitors and a CRL pickup selector switch.
The SSL-3 pickup set comes with
the Rw/Rp middle pickup for hum cancelling in
pickup selection positions 2 and 4.
The SSL-3 pickup is the next step up
from the SSL-5 and SSL-6 with more sustain,
fullness, and output - and less treble response.
The raised flat Alnico 5 pole pieces are taller
for a stronger and deeper magnetic field. Extra
coil windings provide extra power making this
pickup great for heavier music styles.
Rated DC resistance is 16.40 K, resonant peak is
4.40 KHz.
The standard 11 hole
pickguards are fully aluminum foil shielded as they come from
Fender,
click for illustration.
The
'56/'59, '57, '62 and '65 vintage pickguards
require a separate aluminum pickguard shield
which is to be added extra if so desired. Use
separate "Add to Cart" buttons found below for
addition of these pickguard shields.
We offer a few assembly selection
options for your pickguard to appeal to your
particular Strat® body color.
Tone Capacitor: Orange Drop
Polyester Film Capacitor Options.
Here is a link to a video that explains
How Tone Capacitors Work.
0.047 uF
0.033 uF
0.022 uF
0.1 uF
Accessory Color
Options:
White
White with "Seymour Duncan" Logo
Pickup Covers
Parchment
Parchment with "Seymour Duncan"
Logo Pickup Covers
Vintage White
Aged White
Black.
Black with "Seymour Duncan" Logo
Pickup Covers
Pickup Tone Controls:With standard Strat® wiring the bridge pickup does
not have a tone control, only the middle and neck
pickups have a tone control. However, we offer
5 alternate pickup
tone control selections to choose from to enhance
your tonal shaping.
Standard Strat® wiring: Separate
tone control for the middle pickup. Separate
tone control for the neck pickup. No tone
control for the bridge pickup.
Separate tone control for
the bridge pickup. Middle and neck pickups
share a tone control.
Separate tone control for
the neck pickup. Bridge and middle pickups share
a tone control.
Separate tone control for the
bridge pickup. Separate tone control for the
neck pickup. No tone control for the middle
pickup.
Separate tone control for
the bridge pickup. Separate tone control for the
middle pickup. No tone control for the neck
pickup.
Representative photograph. '57 vintage, 1
ply, 8 hole pickguard, with aged white accessories.
Representative photograph of a completed
pickguard assembly. Does not depict actual
pickup set being offered here. Shown as a
similar product representation as a completed
assembly may appear.
Representative photograph of a completed
pickguard assembly.
Important Note: If you are
selecting your pickguard assembly to be built
with one of the '56/'59, '57, '62 or '65 vintage pickguards they are unshielded as
provided by Fender. To have the genuine Fender®
full coverage aluminum pickguard shielding plate or '57 control
area aluminum shielding plate installed please add it separately
below using the appropriate "Add to Cart"
button.
These separate aluminum shielding plates are specific and authentic to
how Fender was shielding their pickguard
assemblies during the '50s and early to mid
60's. The '57 pickguard typically will
have the control area aluminum shielding plate
installed, the '62 and '65 pickguard typically
will have the full coverage aluminum shielding
plate installed.
Select Your Pickguard Assembly Options
Accessories Color:
Tone Capacitor:
Pickup(s) Tone Controls:
Body Ground
Connection:
Price: $330.00
Use the following "Add On" options for
pickguard shielding with the '57 or '62
pickguards that are unshielded.
IMPORTANT INFORMATION ABOUT OUR CUSTOM BUILT COMPLETE PICKGUARD ASSEMBLIES
Typical turn-around time from order placement until your complete pickguard assembly will be ready to ship is up to 31 days.
All custom built pickguard assemblies sales are final. No returns, refunds or exchanges due to the unique nature of the customized options you select for your particular assembly. Each pickguard assembly is custom built on an "As Ordered" basis for each customer with your specific and unique assembly options selected at the time of purchase. All pickguard assemblies are completely tested to ensure 100% correct operation.
All prices are subject to change.
All orders are subject to product availability. All prices are in
USD.
OverDrive Custom Guitar Works reserves the right to cancel any
order.
Fender®, Strat®, Stratocaster®, Tele® & Telecaster® are registered
trademarks of the Fender Musical Instrument Corporation.
OverDrive Custom Guitar Works is not affiliated with Fender Musical
Instrument Corporation.
All content and photography are the sole property
of OverDrive Custom Guitar Works and are not public domain.
Unauthorized duplication or usage of any content of the OverDrive Custom Guitar
Works web site is strictly prohibited.
OverDrive Custom Guitar Works is an authorized
Fender® parts and accessories dealer, authorized
Seymour Duncan dealer and an authorized Allparts
dealer.