Strat Parts, Gilmour Black Strat, Loaded Strat Pickguard

CSS Horizontal Sub Menu Css3Menu.com

PayPal, MasterCard, VISA, American Express, Discover Payments Accepted
 
Item # 5010

Fully Loaded Complete Strat® Pickguard Assembly
Seymour Duncan SSL-52 Calibrated Pickup Set

Must Read - Important Pickguard Characteristic Notice

Seymour Duncan SSL-52 Complete Strat Pickguard Assembly

Complete and fully loaded Strat® pickguard assembly.  Includes everything ready to drop in to your favorite Strat® by simply hooking up the hot wire (audio) and ground wires.  Includes genuine Seymour Duncan SSL-52 (Five-Two) Calibrated pickup set, genuine Fender® pickguard, knobs, switch tip along with top quality CTS potentiometers, Orange Drop polyester film tone capacitors and a CRL pickup selector switch. 

The standard 11 hole pickguards are fully aluminum foil shielded as they come from Fender, click for illustration.

The '56/'59, '57, '62 and '65 vintage pickguards require a separate aluminum pickguard shield which is to be added extra if so desired. Use separate "Add to Cart" buttons found below for addition of these pickguard shields.

We offer a few assembly selection options for your pickguard to appeal to your particular Strat® body color.

Pickguard Assembly Specifications / Options

  • Genuine Fender® Stratocaster® Pickguard Selection Options: 
    • Standard 11 Hole, 3 Ply Black (B/W/B)
    • Standard 11 Hole, 3 Ply White (W/B/W)
    • Standard 11 Hole, 3 Ply Parchment (P/B/P)
    • Standard 11 Hole, 3 Ply Mint Green (M/B/M)
    • '65 Vintage 11 Hole, 3 Ply Eggshell, (E/B/E)
    • '62 Vintage 11 Hole, 3 Ply Black (B/W/B)
    • '62 Vintage 11 Hole, 3 Ply White (W/B/W)
    • '62 Vintage 11 Hole, 3 Ply Mint Green (M/B/M)
    • '57 Vintage 8 Hole, 1 Ply White
    • '56/'59 Vintage 8 Hole, 1 Ply Eggshell
  • Pickup Set: Genuine Seymour Duncan SSL-52 (Five-Two) calibrated set with Rw/Rp middle pickup and hot bridge pickup.
  • Pickup Selector Switch: CRL 5-Way.
  • Potentiometers: CTS 250K 450G Series 10% Audio Taper.
  • Tone Capacitor: 0.047 uF Orange Drop Polyester.
  • Accessories: Knobs, Switch Tip, Pickup Covers Color Options:
    • White
    • Parchment
    • Vintage White
    • Aged White
    • Black
      • For White, Parchment, Vintage White or Aged White we offer an option to have the knobs customized with the dark green letters and numbers +$30.00 upcharge
  • Pickup Tone Controls:  With standard Strat® wiring the bridge pickup does not have a tone control, only the middle and neck pickups have a tone control.  However, we offer 5 alternate pickup tone control selections to choose from to enhance your tonal shaping.
    1. Standard Strat® wiring: Separate tone control for the middle pickup. Separate tone control for the neck pickup. No tone control for the bridge pickup.
    2. Separate tone control for the bridge pickup. Middle and neck pickups share a tone control.
    3. Separate tone control for the neck pickup. Bridge and middle pickups share a tone control.
    4. Separate tone control for the bridge pickup. Separate tone control for the neck pickup. No tone control for the middle pickup.
    5. Separate tone control for the bridge pickup. Separate tone control for the middle pickup. No tone control for the neck pickup.

California Proposition 65 Warning

Seymour Duncan's unique design balanced and calibrated true single pickup set.  This unique SSL-52 (Five-Two) pickup set uses Alnico 2 magnets on the high string pole pieces (E1, B & G) and uses Alnico 5 magnets on the low string pole pieces (A, D & E6).  The result is a very balanced pickup with a bright and springy bottom end, and a smooth and rich top end. The Five-Two answers Strat® players' complaints that their low strings sound too mushy while their high strings are too bright.

The SSL-52's are extremely balanced true single-coil pickups. Recommended for country, pop, blues, classic rock and heavy rock. Alnico 2 magnets provide warmth and softer attack on the three high strings. Alnico 5 magnets provide punch and brightness on the low strings. It's like having two separate presence controls: one optimized for the high strings and one for the low strings. 

This calibrated set includes a higher-output custom bridge pickup, RW/RP middle and regular neck pickup. The hotter custom bridge pickup creates better output balance. The reverse wound, reverse polarity (RW/RP) middle pickup gives you hum-canceling in positions "2" and "4" on the five-way switch.

Seymour Duncan SSL-52 Complete Strat Pickguard Assembly
Representative photograph.  '57 vintage, 1 ply, 8 hole pickguard, with aged white accessories. 

Seymour Duncan SSL-52 Complete Strat Pickguard Assembly
Complete SSL-52 pickup set pickguard assembly.

Seymour Duncan SSL-52 Complete Strat Pickguard Assembly
Controls wiring for a SSL-52 complete pickguard assembly.

Select Your Pickguard Assembly Options

Important Note: If you are selecting your pickguard assembly to be built with one of the '56/'59, '57, '62 or '65 vintage pickguards they are unshielded as provided by Fender. To have the genuine Fender® full coverage aluminum pickguard shielding plate or '57 control area aluminum shielding plate installed please add it separately below using the appropriate "Add to Cart" button.  These separate aluminum shielding plates are specific and authentic to how Fender was shielding their pickguard assemblies during the '50s and early to mid 60's.  The '57 pickguard typically will have the control area aluminum shielding plate installed, the '62 and '65 pickguard typically will have the full coverage aluminum shielding plate installed.
Use The Following "Add On" Options For Upgrades To The Basic Pickguard Assembly
To add the full coverage aluminum pickguard shielding plate for a '62 or '65 vintage pickguard, use the following Add-To-Cart button.

To add the aluminum pickguard control area shielding plate for a '56/'59 or '57 vintage pickguard, use the following Add-To-Cart button.

IMPORTANT INFORMATION ABOUT OUR CUSTOM BUILT COMPLETE PICKGUARD ASSEMBLIES

Typical turn-around time from order placement until your complete pickguard assembly will be ready to ship is up to 30 days.

All custom built pickguard assemblies sales are final. No returns, refunds or exchanges due to the unique nature of the customized options you select for your particular assembly. Each pickguard assembly is custom built on an "As Ordered" basis for each customer with your specific and unique assembly options selected at the time of purchase. All pickguard assemblies are completely tested to ensure 100% correct operation.

 

Navigation   Notices
 
 
  Home All prices are subject to change. All orders are subject to product availability. All prices are in USD.
OverDrive Custom Guitar Works reserves the right to cancel any order.

Fender®, Strat®, Stratocaster®, Tele® & Telecaster® are registered trademarks of the Fender Musical Instrument Corporation. OverDrive Custom Guitar Works is not affiliated with Fender Musical Instrument Corporation.

All content and photography are the sole property of OverDrive Custom Guitar Works and are not public domain.
Unauthorized duplication or usage of any content of the OverDrive Custom Guitar Works web site is strictly prohibited.

OverDrive Custom Guitar Works is an authorized Fender® parts and accessories dealer, authorized Seymour Duncan dealer and an authorized Allparts dealer.
  About Us
  Contact Us
  Policies & Returns
  USA Shipping Info
  International Shipping Info
  Help
  Site Map
  Follow Us
Connect With Us On FaceBook

.
 
209-565-2112
9 am - 4 pm M-F
Pacific Time
OverDrive Custom Guitar Works Stratocaster Parts
      © 2009-2025 OverDrive Custom Guitar Works, Stockton, CA 95204 USA